Lithofin KF Cement Residue Remover – Grout Cleaner for Porcelain & Ceramic Tiles

How to apply Lithofin KF Cement Residue Cleaner

1. Pre-wet the paved surface prior to application.
2. Dilute Lithofin KF Cement Residue Remover to approximately 1:4 with water depending on the stubbornness of the stains & dirt.
3. Apply the solution liberally to the wet surface & spread with a mop, sponge pad or scrubbing brush.
4. Re-apply several times across the surface area, after 10 minutes, brush the surface with a stiff brush and rinse the solution with a sponge or a wet and dry vac.
5. Finally once all staining appears clear, rinse well with clear water.

Important notes

• Always follow the manufacturers instructions and test the product in an inconspicuous area prior to use.
• For light staining from cement based grouting materials such as Flowpoint Paving Grout, the dilution rate can be adjusted to 1:15 - try a sample patch firstly and adjust the concentration of the liquid to suit the stubbornness of the staining or efflorescence. You may need to repeat the process a few times for particularly stubborn stains.
• Acid sensitive surface such as enamel, zinc, marble, limestone, certain decorative tiles, wood, etc. must be protected against splashes.